Potassium hydroxide solution / KOH 10 %
The 10% potassium hydroxide solution is a more concentrated alkaline solution used in various areas of the laboratory and industry. In microbiology, it can be used to distinguish yeasts and filamentous fungi by soaking samples in the solution and then examining them microscopically.
In the chemical industry, 10% caustic potash is used in the manufacture of soaps and detergents, while it is also used in the textile and food industries. In the laboratory, it can be used as a more effective etchant for removing proteins and grease from glassware or neutralizing acids.
In industry, the 10% KOH solution is mainly used for anisotropic etching of silicon and as an electrolyte. In addition, potassium hydroxide in this concentration is used as an etching additive in metallography to make certain structures in metals visible.
In the chemical industry, 10% caustic potash is used in the manufacture of soaps and detergents, while it is also used in the textile and food industries. In the laboratory, it can be used as a more effective etchant for removing proteins and grease from glassware or neutralizing acids.
In industry, the 10% KOH solution is mainly used for anisotropic etching of silicon and as an electrolyte. In addition, potassium hydroxide in this concentration is used as an etching additive in metallography to make certain structures in metals visible.
Article no.: 12656
Differentiation / pickling / blueing / etching
Important Information
UN-Nummer: 1814
Warning labels:
Lagerung: 15 … 25 °C
Haltbarkeit: 36 Monate
product information
Relevant Ingredients:
• potassium hydroxide
Hazard and safety instructions
Signal Word 1: Gefahr |
Signal Word 2: acid_red, , , |
Warning labels: |
Suggested products
-
KIT: Murakami etchant
Surface etching in metallography
Article number: 18403from € 31.80 + VAT